6034/C3 Bearing

Deep groove ball iron retainer bearing 6034/C3

6034/C3 Bore d (mm): 170
6034/C3 Outer Diameter D: 260
6034/C3 Type: Deep groove ball iron retainer bearing
Email: [email protected]


  • 6034/C3 Details
TR Insulated Bearing Co.,LTD specializes in selling 6034/C3 Deep groove ball iron retainer bearing, 6034/C3 bearing related information: Model: 6034/C3 Bearing; Type: Deep groove ball iron retainer bearing;Bore Diameter (mm) : 170; Outer Diameter (mm) : 260, if you want to know more about 6034/C3 Bearing for information, you can do online consultation or call the hotline and email us [email protected], we will serve you in detail.
 
6034/C3 Bearing TR deep groove ball bearing installation method Nine-star deep groove ball bearing installation method 1: press-fit: the inner ring of the bearing and the shaft make a tight fit. When the outer ring and the bearing seat hole are loosely fitted, the bearing can be pressed first by the press. On the shaft, then insert the shaft into the bearing housing hole together with the bearing. On the end surface of the bearing inner ring during press-fit, a mounting sleeve made of soft metal material (copper or mild steel), bearing outer ring and bearing housing hole Tight fit, when the inner ring and the shaft are loosely fitted, the bearing can be pressed into the bearing housing hole first. At this time, the outer diameter of the assembly sleeve should be slightly smaller than the diameter of the seat hole. If the bearing ring and the shaft and the seat hole are both When tightly fitting, install the inner ring and the outer ring to press the shaft and the seat hole at the same time. The structure of the assembly sleeve should be able to simultaneously tighten the end faces of the inner ring and the outer ring of the bearing. The installation method of the nine-star deep groove ball bearing is as follows: heating: By heating the bearing or housing, using thermal expansion to transform the tight fit into a loose fit installation method. It is a common and labor-saving installation method. This method is suitable for the installation of bearings with large interference, before the hot loading or The ferrule of the separable bearing is placed in the fuel tank Heat 80-100 ° C, and then remove it from the oil as soon as possible onto the shaft. In order to prevent the inner ring end face and the shoulder from sticking tightly after cooling, the bearing can be axially tightened after cooling. The bearing outer ring and light metal When the bearing seat is tightly fitted, the heating method of the heated bearing seat can be used to avoid the surface of the mating surface being scratched. When heating the bearing with the oil tank, there should be a grid at a certain distance from the bottom of the box, or the bearing should be hung with a hook. The bearing should not be placed on the bottom of the box to prevent the sinking of impurities into the bearing or uneven heating. There must be a thermometer in the tank. Strictly control the oil temperature should not exceed 100 °C to prevent tempering effect and reduce the hardness of the ferrule. 


  • Related Products
Basic Bearing No. Bore d (mm) Outer Diameter D (mm) Type

6018M/C3VL2071 90 140 Deep groove ball electric insulation bearing
6028C3 140 210 Deep groove ball iron retainer bearing
6314/C3V3031A 70 150 Deep groove ball electric insulation bearing
NU313EM/C3J20A 65 140 Cylindrical roller electric insulation bearing
6311-C3-J20C 55 120 Deep groove ball electric insulation bearing
NU318EM/C3J20B 90 190 Cylindrical roller electric insulation bearing
6044/C3VL2071 220 340 Deep groove ball electric insulation bearing
6307TBP63 35 72 Deep groove ball bakelite retainer bearing
NU2330ECM 150 320 Cylindrical roller electric insulation bearing
NU312EM/C3VL0241 60 130 Cylindrical roller electric insulation bearing


Leave Message