6212M/C3J20C Bearing

Deep groove ball electric insulation bearing 6212M/C3J20C

6212M/C3J20C Bore d (mm): 60
6212M/C3J20C Outer Diameter D: 110
6212M/C3J20C Type: Deep groove ball electric insulation bearing
Email: [email protected]


  • 6212M/C3J20C Details
TR Insulated Bearing Co.,LTD specializes in selling 6212M/C3J20C Deep groove ball electric insulation bearing, 6212M/C3J20C bearing related information: Model: 6212M/C3J20C Bearing; Type: Deep groove ball electric insulation bearing;Bore Diameter (mm) : 60; Outer Diameter (mm) : 110, if you want to know more about 6212M/C3J20C Bearing for information, you can do online consultation or call the hotline and email us [email protected], we will serve you in detail.
 
6212M/C3J20C Bearing Insulated bearing product features: Electrically insulated bearings can avoid damage caused by electrical corrosion, so it can be used in motors to ensure more reliable operation than ordinary bearings. It is more cost effective and reliable than other insulation methods such as shaft or housing insulation. Insulated bearings have the same dimensions and basic technology (bearing capacity) as non-insulated bearings and are therefore completely interchangeable. Insulated bearings have a 100μm thick coating on the outer ring surface that can withstand voltages up to 1000 V DC. A special spray process creates a uniform coating of uniform thickness and adhesion, which is then further treated to protect it from moisture and humidity. Electrically insulated bearings have a longer service life than other standard non-insulated bearings. Because it is completely immune to damage caused by overcurrent, it has very high operational reliability. The most commonly used insulating coating in motors is the VL0241. Even in humid conditions, it can very well prevent the passage of current. Ceramic coated bearings also require sealing. Product application: It is suitable for motors, generators, especially variable frequency motors. There are three types of insulating bearings that are often sold on the market: surface-coated ceramics, surface-coated resins, and ceramics for rolling elements. Surface coated ceramics have the widest range of uses. Installation method of electric insulating bearing: The insulating bearing chamber is made of insulating material with a certain hardness in the inner hole and the end surface of the bearing. Matters needing attention when installing insulated bearings, do not directly hit the bearing surface with a hammer during installation, and do not use insulated bearings with surface defects to clean the bearing chamber and bearings. Do not adhere to the conductors and choose a suitable shoulder. To avoid current flowing from the bearing side through the bearing, the bearing chamber must be inverted at least 0.5MM deep slope 10-15 & deg; angle, for DC motor, the shaft should be grounded during the resistance test. 


  • Related Products
Basic Bearing No. Bore d (mm) Outer Diameter D (mm) Type

6324/C3J20B 120 260 Deep groove ball electric insulation bearing
6413-C3-J20A 65 160 Deep groove ball electric insulation bearing
6019/C3J20AA 95 145 Deep groove ball electric insulation bearing
6018-C3-J20B 90 140 Deep groove ball electric insulation bearing
6040M/C3VL2071 200 310 Deep groove ball electric insulation bearing
6220-C3-J20A 100 180 Deep groove ball electric insulation bearing
6213-C3-J20B 65 120 Deep groove ball electric insulation bearing
6412M/C3VL2071 60 150 Deep groove ball electric insulation bearing
6044-C3-J20A 220 340 Deep groove ball electric insulation bearing
6040M/C3J20A 200 310 Deep groove ball electric insulation bearing


Leave Message